Veteran Snowman’s first driving lesson was in this 1906 Rover 6hp, at Elmbridge, Worcerstershire on 14th January 2010. Conversation with instructor was minimal, but note the wheelspin !
Classified Ads
RSR Forum posts- Rovers Spotted • Re: Rover 14 Streamline 1934 Bonhams Online 20/12/24That's a lovely looking car. Will it reach reserve, I really don't know, Rovers' never seem achieve the prices they should at auction.£348 new...47p2
- Rovers Spotted • Rover 14 Streamline 1934 Bonhams Online 20/12/24https://carsonline.bonhams.com/en/listi ... 6414ed27b4The link above is for BLM79, on Bonhams online auctions starting tomorrow. I will be intrigued to see where the bids reach and how many bidders there are. £40000 - £50000 estimated. It will make an interesting comparison with how 15/6 Riley Kestrels have been doing recently. At first I expected it to […]SHyslop
- Meetings, Rallies and Events • RSR Shropshire & Staffordshire Region meet tonight, 17th December 2024.The RSR Shropshire & Staffordshire Region meet tonight, 17th December 2024.Members and Rover enthusiasts are cordially invited with all Rovers to the monthly meet held on every third Tuesday of the month from 7.30 pm.The location is THE HARROWS, Stafford Road, Coven, Wolverhampton WV9 5AWThe pub serves excellent food and Tuesday is 2-4-1 pizza night […]markgray
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Car shaking setting offAh well, clutch repair it is then... what could possibly go wrong..Willem
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Car shaking setting offI see, I had ruled those out but have had a look just to confirm. I've taken a couple of photos of a bellhousing and also the back of an engine and you'll see they give no access to the flywheel. I'm sorry the news on that front isn't better. In case you wonder what […]SHyslop
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Car shaking setting offJust to clarify, the bottom of the gearbox housing does have 2 holes in it, with a screwdriver you can push from the back towards the front aout 2 1/2 inches in so I assume to the front of the casing. Attached is a photo with a screwdriver in one of the holes, looking towards […]Willem
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Car shaking setting offUniversal joints, any brakes grabbing a bit, clutch cable sticking ? Unlikely I know but I think you're wanting to eliminate anything possible before biting the gearbox out bullet. I'll confess, I'm struggling with the two holes in the bottom casing bit. I'm not seeing them in the bellhousing nor in a clutch cover but […]SHyslop
- Wilks' cars P1 and P2, thats cars up to 1947 • Car shaking setting offAs the title says, COA550, 1936 12 tourer shakes when setting off, very difficult to prevent it happening, doesn't happen at any other time. The suspension bushes on the front of the engine seem fine (the bolts have a bit of play), the gearbox bush is tight, my question is: there are 2 holes in […]Willem
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Fuel Gauge not working : gauge or sender fault?On the dash beside the petrol gauge there should be a black button. When out (normal) the petrol gauge shows the petrol level in the tank. When pushed right in, the level of the oil in the sump is shown instead .The button is spring loaded to return to the petrol level after use. Provided […]SHyslop
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Fuel Gauge not working : gauge or sender fault?Brilliant thanks.But I'm confused with your " ... and that is to press the oil level button and see what reading it shows!!..."Oil?, button? What/where - tell me more please.P27
- Rovers Spotted • Re: Rover 14 Streamline 1934 Bonhams Online 20/12/24
