Been disappointed when you could not locate a Haynes manual for your early Rover? Then be disappointed no more!
Classified Ads
RSR Forum posts- Early post WWII, P3 the original Rover 75 and 60 • Re: gearbox and engine parts ss exhaust for saleHi Did you sell your P3 exhaust system ?Don Colebyb
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerWill,Good video. Quite a straight forward job and easier than taking the rad out, which would leave you doing pretty much the same thing anyway by the looks of it. Well done.To get the rad out, the bolts into it on either end of the bracing bar (easily seen in your video) that also hold […]TonyG
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerI have posted a short video about my eperience of removing and replacing the engine suspension rubbers on youtube, just in case anyone is interested.https://www.youtube.com/watch?v=0uXaRVXbaM8WillWillem
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerThank you for your memories Tony, I have had her up to 70 mph, quite fast enough as far as I am concerned.There is a file with the car that also has a photo of the second owner, (son of the first one) and David Moseley managed to track down a family member of the […]Willem
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerHi Will,I will try to find those videos. It is probably a good idea to do a de-coke while you have so much removed from the engine already. Also a good thing to do as a winter job, ready for the better weather.Seem to recall that torquing the head is a two stage job as […]TonyG
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: find sunroof gasketMike Couldry at Meteor Spares Service Ltd.-tel. 0115 9811222- or Mike Evans at Viking Engineering Developments Ltd.- tel. 07879 630511 would be the ones to speak with47p2
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerHi Tony,Thank you for your advice, I did remove the waterpump and a few other bits, supported the engine and loosened the bolts on the engine and the 4 bolts that hold the engine suspension assembly, I would think that to get the job done properly it is neigh on impossible to replace the rubber […]Willem
- Wilks' cars P1 and P2, thats cars up to 1947 • find sunroof gasketHi I am a new member I have a 1947 P2 I am looking for a sunroof gasket as my window is leaking Does anyone have contact info? Thanks!ramiro
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Engine Mounting replacement 12 tourerWill,Just had a look at my 12T and I think you could probably remove the whole engine mounting assembly, without needing to remove the radiator. However, to do this, I’d suggest removing the water pump, fan and hoses. Then, with the engine supported from below, it looks possible to unbolt the engine mounting bolts into […]TonyG
- Rovers Spotted • Re: Rover 14 Streamline 1934 Bonhams Online 20/12/24Very well known to the RSR. It will be interesting to seewhat the top bid isMikeGOY189
- Early post WWII, P3 the original Rover 75 and 60 • Re: gearbox and engine parts ss exhaust for sale
