You are responding to Ad: Land Rover Discovery S1 and S2 Genuine Land Rover Workshop Manuals.
Classified Ads
RSR Forum posts- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Petrol Pump repair/replace - 1937 12 P2Thank you both, a wealth of info.I don't get to see the car for 2 wks, but will report back then.P27
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Petrol Pump repair/replace - 1937 12 P2Willem is right, Flexolite have all the right bits. You might just need a diaphragm from the description you have given but read on..... If you haven't worked on one of these before, things to know:There are two separate types of valves. Older pump tops have paxolin valves (check the size , two widths available) […]SHyslop
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Petrol Pump repair/replace - 1937 12 P2I rebuilt the fuel pump on my 1936 Rover 12 with this: https://www.flexolite.co.uk/products/fp ... ent-to-bd1Yours might be different, I took mine apart and compared the parts to the various ones they have on their website. This worked for me but no doubt someone with much more experience will be along before too long..WillemWillem
- Wilks' cars P1 and P2, thats cars up to 1947 • Petrol Pump repair/replace - 1937 12 P2I've been asked to repair or replace the petrol pump on a 1937 P2, because it is apparently leaking petrol into the sump oil.I've found a vid. here: https://www.youtube.com/watch?v=gFpMBkJHs0A&t=40sIs this similar/appropriate to the P2?Does anyone have the pump part number?And advice where to get a replacement or a seal kit?Any help much appreciated.P27
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: track rod endsthanks for your reply I did speak to meteor and mike said he was waiting for some to be returned to him after refurbishment so I will contact him and see if he has received them back ,after replacing my steering box after a rebuild (ics) I still have far to much play so I […]dex1961
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: track rod endsI don't have anything as new as a Discovery but I am lead to believe the thread size to fit the rod to the end is 11/16 UNF, one LH, one RH. The P2 part is 40471 or 72, depending on the side, and they were the same from 1936 to 1947. Before 1936, they […]SHyslop
- Wilks' cars P1 and P2, thats cars up to 1947 • track rod endsdoes any body know if the defender track rod end are the same size as the rover 12(1946dex1961
- And those not mentioned above .. • Re: Engine partsMike Couldry at Meteor Spares Service Ltd.-tel. 0115 9811222- or Mike Evans at Viking Engineering Developments Ltd.- tel. 07879 630511 would be the ones to speak with47p2
- And those not mentioned above .. • Engine partsHi everyone,i am thinking of buying a rover special 10 1934 vintage.The engine is siezed,does anyone know a parts supplier for these vehicles.Nello
- Rover History • Re: Pathe news reel on the Rover companyThank you for your interesting post MJLSCOTT. I had not seen that before47p2
- Wilks' cars P1 and P2, thats cars up to 1947 • Re: Petrol Pump repair/replace - 1937 12 P2
